How to avoid accidents when using cutting discs?
- Source:
- Time of issue:2021-05-25 09:51
- Views:
(Summary description)The cutting blade can be used to cut thin stainless steel profiles, which saves materials. Thicker cut materials with a larger thickness, such as bolts, angle irons, and square tubes, have higher strength and are not easy to burst.
How to avoid accidents when using cutting discs?
(Summary description)The cutting blade can be used to cut thin stainless steel profiles, which saves materials. Thicker cut materials with a larger thickness, such as bolts, angle irons, and square tubes, have higher strength and are not easy to burst.
- Categories:Company news
- Author:
- Source:
- Time of issue:2021-05-25 09:51
- Views:
The cutting blade can be used to cut thin stainless steel profiles, which saves materials. Thicker cut materials with a larger thickness, such as bolts, angle irons, and square tubes, have higher strength and are not easy to burst. In addition to the selection of qualified cutting discs, the correct technique is very important. As mentioned above, the poor flatness of the cutting blade, the uneven structure of the cutting blade, the high hardness of the cutting blade, and the lack of toughness of the cutting blade resin will cause the fracture of the cutting blade. In order to avoid accidents, the following points are required:
1. To have sufficient strength, the rotation strength of the normal cutting disc must reach 1.5 times the speed of use.
2. To have a good flatness, the flatness of the cutting piece should be controlled within 0.3mm.
3. Choose a suitable cutting blade. Because the use of the cutting blade is more complicated, you must choose the hardness of the cutting blade according to your own needs. If it is too hard, it will break, and if it is too soft, it will increase the cost.
Cutting efficiency is what every factory values. Only by improving work efficiency can there be more benefits. The size of the cutting piece also has an important relationship with it. The improper cutting machine and the different materials of the cutting workpiece will lead to low cutting efficiency. And even more should choose the appropriate cutting blade to ensure fast cutting speed and high efficiency.
相关新闻


How to avoid accidents when using cutting discs?

Why should the grinding wheel cutting disc be statically balanced during installation

How long is the service life of the cutting disc? How to extend?

Address: No. 49, Weitai Road, Phase II, Zhiying, Yongkang, Jinhua City, Zhejiang Province
Phone:13967457388
Email:zhengbo@zjzb-abrasives.com
Copyright © Yongkang Zhengbo Abrasives Co., Ltd.
Copyright © Yongkang Zhengbo Abrasives Co., Ltd. 浙1CP备05004731号